So you are planning on renovating your kitchen. You have surfed the net, thumbed through numerous home design magazines and perhaps visited several showhomes. You know what style you like, and you are ready to embark one of the most exciting journeys of your life!
So what’s next? What do I do? That’s simple… It’s time to meet your Kitchen Designer!
We have unique way of tackling the kitchen planning process. Ours is quite simple…We keep it simple because it’s proven and it works, our near 30 year history is a true testament to that fact.
The DIY Approach:
This method is for clients that are comfortable measuring their own space
1) Measure your space (See below for measuring tips and tricks). *If preferred, contact Superior to measure for you*
2) Take some Pictures of your space.
3) Collect Appliance specs, or measure your existing ones if you plan on keeping them.
4) Call to book your appointment to meet your Designer!
Side Note: Remember, if you are considering on removing walls or changing structure, it’s always best to consult a qualified Contractor first! Your contractor may also need to call in an engineer and/or architect for further evaluation. There may be structural elements required that weren’t in your design vision for the space, like a post(s) or beam(s), etc. This is all information that you will absolutely need prior to meeting with your Kitchen Designer. Sometimes your Kitchen Designer will even have methods or ideas to incorporate some of these details into the plan, therefore producing a better result than originally imagined!
How do I measure my space?
Grab a decent tape measure, an extra set of hands (for assistance & verification), a pen & paper and you are ready to roll!
1) Draw a “Birds Eye” sketch of the space related to the project. Be sure to include all walls, even walls without cabinets.
2) Write down all inside wall dimensions.
3) Mark the position and width of all Windows, Openings, Pass-through’s etc. – Please be sure to measure to the outside of the casings and take note of the current casing width.
4) Mark all of the current locations of your sink, stove, fridge, cook top, wall oven, microwave, etc.
5) Notate all locations of plumbing, electrical, gas lines, phone lines, internet, vacuum outlets, etc. (When analyzing plumbing, please be sure to take special note as to whether or not you have any pipes running through your exiting base or upper cabinets.
6) Collect desired or current appliance specs and sizes. (Width, Depth, Height)
7) Measure the ceiling height, it’s advantageous to measure in several spots, please note any inconsistencies. Also, remember to note any bulkheads, boxed or closed in pipes, chimneys, baseboard heaters, etc.
8) Take a few digital pictures of your space and email them to your Kitchen Designer before your preliminary meeting.
If in doubt, make a note and ask, Have Fun and be Safe!
How long does it take to get my kitchen?
Lead times on material and production may vary, depending on complexity of project and seasonal demands. Upon a perfect and final plan the average time for cabinetry is 4-8 weeks. I can give you an accurate time of delivery when it’s time to order your project.
What are some of the unexpected things to think about during my project?
A common area that most clients overlook if acting as their own renovation contractor, is the fact that the kitchen cabinets get installed first, then typically the countertops get templated and go into production and then are re-installed. This can be a 1-4 week gap depending on countertop lead time and the materials selected. In plain English, You’ll have NO SINK!
Solution – Install a temporary countertop and sink; then remove them before the installation of your beautiful new countertop.
